Here are a few solutions you can try at home before you bring your computer in.

First and foremost, it’s important to degrade your computer and make it feel bad about itself. If you do not break its spirit, it will not conform to your wishes. I recommend playing Beethoven to it, as Beethoven is very emotional music, which will break the computers spirit as it knows it can never be one of us. Do not play the computer Death Metal. The term Death Metal makes the computer combative and uncooperative as a computer is made out of mostly metal.

Sometimes your computer will not turn on at all. You push the power button, all the lights and fans turn on, but you see nothing but a blank screen. In these cases a potential simple fix is to clear the capacitors. If you unplug the computer and push the power button around 10 times that clears any extra electricity from the computer that may have been causing issues. Plug the computer back in and try to power it on again. You would be amazed how often this fixes your issue. You’d also be amazed at how often computer technicians use this technique in the shop. If it doesn’t you might have some bad hardware that will need to be replaced such as your power supply or ram.

In other situations where the fans and lights turn on, but the computer does not, the BIOS has become corrupted. The BIOS is responsible for many tasks, but in this case it helps turn on and initialize all the hardware on the computer and if corrupted can cause issues during power on. If you were wondering, yes the BIOS would be the most dangerous part of the computer if it were to become self-aware.

For this fix we need to open up the case. First unplug the computer. Every case is a little different, but often there are screws on the back of the computer on the left hand side that hold the left side panel in place. Remove those screws and see if you can slide the side panel away. Others have a lever or large button that needs to be slid or pushed to one side. Once you can see inside the computer look for a small watch battery that should be on the opposite wall, attached to the motherboard. If you are not sure what I am talking about it may be best to take the computer into a shop, but if you can see the battery use a small screwdriver to release the latch holding it so you can remove the battery. Leave the computer unplugged for ten minutes, press the power button 10 times, and then place the battery back onto the motherboard. Close your case, plug the system back in, press the power button and see if anything has changed.

If your computer crashes when trying to load windows you can use a few of the built-in auto repair options to try and get the computer limping. When the computer is starting up press the F8 Key repeatedly and by repeatedly, I mean really press it several times over and over. If that doesn’t work the first time, restart the computer and try again. This will bring you to the windows startup recovery page. Once on this menu you can try the option “Boot my computer using last known good configuration”. This will load the computer back to known good settings and try to start the system. This is the best option if you are aware of a change. If you attempted to update a driver or you installed a new program and the next time you turned the computer on you had startup errors this option should undo all those changes and allow the system to start. Do not worry about modifications you made to any files however. Any documents, saved games, e-mails, or other user generated content will be unaffected by this step. Only computer operating system files will be restored.

Now if that does not work on that same F8 menu you can also try an option called “Safe Mode With Networking”. This is designed to start a limited version of windows without any additional devices configured allowing you to back up your files, run repair programs, re-install drivers, or even use windows system restore to return your computer to an earlier point where it worked. Repairs in safe mode can be complicated, so if you are not comfortable with the steps listed here you may need to take the computer into a shop. In some cases even starting the computer in safe mode can resolve issues, so after safe mode has started try re-starting the computer normally to see if anything has changed.

If you do end up needing to find a shop to fix your computer, a great way to find a good one is Google. On another computer either at work, a library, or at a friend’s house go to Google and search for a repair shop in your city. For example, I live in Calgary Alberta Canada, so I would look for “Calgary Computer Repair”. This type of search will bring up hundreds of results, but keep an eye at the top few and see how the website feels. Often you will find a smaller shop that is local to the community, rather than a large chain store. You will often receive better service from the small local well established shops as they will be focused on return customers, and will have higher skilled technicians.

These are only a few of the tools that Calgary Computer Repair shops use to fight the evils of viruses and computer corruption. Sometimes hardware or software failures make it impossible to repair the computer yourself without parts or help from outside sources, but by following the few tricks listed above you can potentially save yourself, and your friends valuable time and money.

Incoming search terms:

• repair your computer doesn\t work
• new gadgets
• system repair option doesn\t work

Some webmasters think that you need a virtual private server, but the truth is that most people won’t. The reason I say this is because most website owners don’t have the need for one right away. Being that a VPS server is better for high traffic websites, you will probably be at least a year or two away from having to pay for one. Just know that a VPS server is used for many different things but the truth is that nobody will know if you need one or not because you are the only person that knows what your site is all about and the purpose of it. Trust me when I say this, a VPS server is great but you probably don’t need it just yet. I would recommend starting out with a shared hosting account for now and then work your way up.

Incoming search terms:

• battery charger png

Before selecting a host, you should obviously consider the costs and investments associated with each option. By comparing the costs of different sites, you can figure out where your money is actually going. Do not get sucked into the allure of free web hosting servers. There is always going to be a catch. Generally these hosts do not allow you to control the advertisements that pop up on your site.

Reliability is also an important factor while picking servers, even if it’s reseller hosting. This is important because you need a server that can guarantee you an uptime of at least 99 per cent. It’s advisable to talk to friends who have their own small online businesses as well. Also be sure to check online reviews of different hosts as well.

Another important factor to consider is bandwidth and access speed. You want the site to open fast for your clients. At the same time, you want the server to be able to handle the amount of traffic your site receives without crashing entirely. It wouldn’t hurt to find a server with 24/7 customer support in case such a situation arises.

On the Blackberry Playbook

On the home screen tap on Settings (this is the grey cog on the top right hand corner of the screen).

We need to jot down the ip address of the Playbook so tap on About – Network. You should see the IPv4, IPv6 and MAC Addresss. Write down the IPv4 address as we will need this later.

Now in Settings scroll down the menu on the left until you come to Storage and Sharing and tap on it. Locate Network Identification and tap on Properties. This is where you enter details for the network so choose a name for your Playbook, enter the name of your Workgroup and a User name to access the Playbook when it is mounted. Once done tap Back.

Back on the Storage and Sharing screen make sure that File Sharing, WI-Fi Sharing and Password Protect options are all set to on.

Tap on Change Password to set a password to access the files when the Playbook is mounted.

Your Playbook is now correctly configured. Now onto Windows 7.

On the Windows 7 System

Go to Start – Run and in the Open box type file://10.0.0.172 where 10.0.0.172 is the address of the Playbook on the network.

A box should appear asking for network credentials. Enter the username and password you set up earlier on the Playbook.

Once accepted you will see two shared folders on the screen – certs and media. All of your files will be in the media folder. You can now happily transfer files back and forth between your PC and your Playbook.

But what if you only want to transfer files from the Playbook?

If you just want to get data off the Playbook an easier way is to download an app called Wifi File Explorer. Once downloaded and installed you can access the data through a web page!

Incoming search terms:

• playbook no file access

This might be indicative of software error, corrupted files and bad sectors on the hard drive. But this error can be resolved. You only need to know the basic functionality of your PC and its software. Here are few methods that will help you deal with this error message while starting Windows XP.

Repairing Windows by running CHKDSK

- You first need to restart your system with Recovery Console and run CHKDSK. This should be done with the ‘Repair’ option. This is done to ensure error free hard disk.
- To start up the recovery in Windows XP insert the installation disk and boot from it
- A setup screen for Windows XP will open up where you need to choose the ‘Repair’ option to enable utilizing recovery console. Press R key for this
- Choose the installation and type 1. Then press Enter
- In the software window type CHKDSK /r to enable the disk check

This reinstalls the OS without affecting the data.

Repair installation of Windows

Now you again require applying the Windows or software updates. For this you require to boot your PC from the disk and press ‘Enter’. This process is similar to the reinstallation process of Windows. Your existing system files are being replaced without adversely affecting your data. After following the commands you will be able to restore Windows back to factory settings. Here you need to ensure that you are using the genuine installation disk that comes with the system.

Configure the operating system

This is the last way to solve the issues related to the error: “We apologize for the inconvenience, but Windows did not start successfully”. For this you need to boot the system and press the F8 function key.

Then select the option of “Last known good configuration” from the Advance menu

This will restore our system back to the state when it was working fine. If this still does not work then in the ‘Run’ command box type:

%systemroot%\system32\restore\rstrui.exe

You will need to follow the instructions to restore your system to previous state. This will fix the errors and other software related issues. The steps mentioned above will help you solve the issues related to the error message: “We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.”

Incoming search terms:

• we apologize for the inconvenience but windows did not start
• we apologize for the inconvenience windows